How To Build Your Engravings for Endgame for Lost Ark - maxroll.gg (2024)

Last Updated: May 16th 2023

Share on Social

Introduction

Engravings are one of the most crucial min max Endgame activities you can do. Planning your Engravings can be tedious and confusing if you don't know where to start. There are multiple philosophies in building your Engravings. Let's look at different ways you can make your build efficient!

I will first discuss Argos Endgame Engraving Builds and then discuss Legion Raid Endgame Engraving Builds.

To learn more about Engravings, visit our Engraving Guide.

Legion Raid Endgame 5x3 or 5x3 + 1 Engraving

With Legion Raids come Relic Accessories. Relic Accessories can have Engraving pairings of +5/+3. The most common Engraving spread with Legion Raids is the 5x3 setup. Uncommonly, you might encounter the 4x3, 1x2, and 1x1 setup. If you're a class that only really needs a Level 1 Class Engraving, you can choose to find an Engraving is decent at Level 2, like Adrenaline. This is sometimes more hassle than it's worth, so people just go for the Level 3 Class Engraving. For Wardancers with Dominion Fang Set and ~1600 Swiftness, it's possible to go Awakening Level 2.

The 5x3 + 1x1 is the whale Engraving setup. To achieve this setup, you need at least a +9/+7 or +10/+6 Ability Stone. You have less than a 0.1% chance of achieving this result from a Relic Ability Stone. If you are a whale going for this, hopefully you choose the cheapest Relic Ability Stone pairing. Before you scream P2W, this setup offers a marginal damage increase even if you are playing a class that uses a Class Engraving that has high efficiency at Level 1. The 5x3 setup is perfectly fine for the content we will have for the future up to Brelshaza Hard Mode.

5x3 Engraving Spread (75 Nodes)
+12 Equipment Engraving
+9 Equipment Engraving
+40 From Accessories (+8 per Relic Accessory)
+14 Ability Stone (+7/+7 or +9/+5)

5x3 Engraving Spread (75 Nodes)
+12 Equipment Engraving
+12 Equipment Engraving
+40 From Accessories (+8 per Relic Accessory)
+11 Ability Stone (+6/+5)

5x3 + 1 Engraving Spread (80 Nodes)
+12 Equipment Engraving
+12 Equipment Engraving
+40 From Accessories (+8 per Relic Accessory)
+16 Ability Stone (+9/+7 or +10/+6)

Example Build 1 (4x3 + 1x2 + 1x1 | 333321) (Does not account for cheapest pairings)
+12 Grudge Engraving Recipe
+12 Adrenaline Engraving Recipe
+5 Esoteric Skill Enhancement / +3 Adrenaline Burning Will Necklace
+5 Increases Mass / +3 Grudge Burning Will Earrings
+5 Increases Mass / +3 Raid Captain Burning Will Earrings
+5 Awakening / +3 Raid Captain Burning Will Ring
+5 Awakening / +3 Raid Captain Burning Will Ring
+6 Raid Captain / +5 Increases Mass Relic Ability Stone
Example Build 2 (5x3 | 33333) (Does not account for cheapest pairings)
+12 Grudge Engraving Recipe
+12 Esoteric Skill Enhancement Engraving Recipe
+5 Increases Mass / +3 Esoteric Skill Enhancement Burning Will Necklace
+5 Increases Mass / +3 Grudge Burning Will Earrings
+5 Increases Mass / +3 Adrenaline Burning Will Earrings
+5 Ambush Master / +3 Adrenaline Burning Will Ring
+5 Ambush Master / +3 Adrenaline Burning Will Ring
+6 Adrenaline / +5 Ambush Master Relic Ability Stone

Argos Endgame 4x3 or 4x3 + 1x1 Engraving

Within reason, the best possible Engraving setup you can reach with Legendary Accessories, is 4x3 + 1x1. 4x3 means that you have 4 Level 3 Engravings. 1x1 means 1 Level 1 Engraving.

For the additional 1x1 Engraving, you need to purchase 2x20 Legendary Engraving Books or 1x20 Legendary Engraving Books and cut a +9/+6 Ability Stone.

How To Build Your Engravings for Endgame for Lost Ark - maxroll.gg (1)

4x3 Engraving Spread (60 Nodes)
+9 Equipment Engraving
+9 Equipment Engraving
+30 From Legendary Accessories
+12 Ability Stone (+6/+6 or +9/+3)

4x3 + 1x1 Engraving Spread (65 Nodes)
+12 Equipment Engraving
+12 Equipment Engraving
+30 From Legendary Accessories
+12 Ability Stone (+6/+6 or +9/+3)

Philosophy Behind Building Engravings

Equipment Slot Engraving Philosophy

Most people figure out the most expensive Battle Engravings on accessories and slot in +9 for that Engraving on their equipment. This way, you don't have to purchase some insanely expensive accessory to complete your build. Now, whether you choose to also slot in a +9 or +12 Class Engraving on your equipment will be discussed below.

How To Build Your Engravings for Endgame for Lost Ark - maxroll.gg (2)

Class Engraving on Equipment Slot or Accessories

Class Engravings are not guaranteed on Legion Raid Accessories in any form. Therefore, the price of Relic Accessories with +5 Class Engraving become much more expensive than their Legendary Accessories counterparts. Imagine needing 3 of these to hit Level 3 for your Class Engraving. Because of this, players opt for slotting a Class Engraving on their Equipment Engraving Slot. Players also opt to purchase 20 Class Engraving Recipes for their Class Engraving. You will need one Engraving on your Equipment Slot to be +12 regardless to hit 5x3.

If you're going for a 4x3 setup, you might consider going for Class Engravings on Legendary Accessories instead of equipment slot. Accessories from Hard Mode Oreha Abyss Dungeons and Argos Abyss Raid are guaranteed to have Class Engravings. Because of how easy it is to get these types of Accessories, you might find that a Class Engraving + Battle Engraving accessory would be a cheaper pairing than double Battle Engraving accessory. So people like going +3 Class Engraving from each of their 5 accessories to hit their Level 3 Class Engraving.

How To Build Your Engravings for Endgame for Lost Ark - maxroll.gg (3)

Battle Engravings on Ability Stones Philosophy

People like going for an Ability Stone that has a Battle Engraving pairing that is expensive to find on accessories. If the bare minimum you need is +6/+5, you shouldn't fail all too much and will make your accessory search cheaper.

If the situation calls for a +7/+7 cut, I like choosing the cheapest Ability Stone combination that fits my Engraving setup. The reason being so that when I inevitably fail to cut an ideal Ability Stone on the first one I purchase, I can re-attempt without much cost. Of course, they still cost Pheon. It's up to you to figure out which option you prefer.

How To Build Your Engravings for Endgame for Lost Ark - maxroll.gg (4)

Cutting an Ability Stone First or Last

There are two ways people approach an ability stone; some people cut their Ability Stone first and then find the correct accessories to match, or leave their Ability Stone for last.

Cutting Stone First: Let's take a look at a potential scenario. You have 2 +12's on your equipment slot. This is the method used by the most if not everyone. This means you only need a +6/+5 Ability Stone at the minimum. Let's say you cut a stone and you get +6/+6. This means that on one accessory, you have the possibility of only needing a +4/+3 instead of a +5/+3 accessory, saving you gold. Any higher than that, and you can save even more gold. A +7/+7 stone allows you to forgo the secondary engraving on an accessory piece, potentially making your necklace cheaper to buy.

How To Build Your Engravings for Endgame for Lost Ark - maxroll.gg (5)

For 5x3, if you only have 1 Engraving whose Battle Engraving Recipes you purchased for, your life becomes more difficult. You must hit +7/+7 on your Relic Ability Stone. The odds of that happening on a Relic Ability Stone are close to around 5%. Depending on how much Pheons cost and how much Relic Ability Stones cost, it might just be cheaper to purchase 20 Class Engraving Recipe for a 2nd Engraving. This way, you only need a +6/+5 Ability Stone for a 5x3 build.

Summary

You can flip points 3 and 4.

  1. Choose expensive Class Engraving or Battle Engravingto put on Equipment Slot.
  2. Select cheapest Ability Stone Engraving pairing (more expensive Accessories) or Select Expensive Ability Stone Engraving pairing (cheaper Accessories). Choose to either cut stone first or save until last.
  3. Buy Accessories to fill out remaining Engraving nodes and make sure not to accumulate more than 3 Malus Engravings.
  4. Buy the Ability Stone with the 4th Malus Engraving and cut it.

Credits

Written by Yaen
Reviewed by Starlast

How To Build Your Engravings for Endgame for Lost Ark - maxroll.gg (2024)

FAQs

How do you get perfect engravings in Lost Ark? ›

Another way to get engravings is via accessories. In the late game, accessories like rings, necklaces and so on, will drop with random engravings on them. These can be either battle engravings or class engravings, and you can equip two rings and two earrings.

What is the max number of engravings in Lost Ark? ›

Each level of the engraving gives you 3 points when you equip it, meaning that uncommon is 3, and legendary is 12. Engravings can also be found on gear, so you will use gear to augment your engraving to max it out to 15.

How do you increase Engraving nodes in Lost Ark? ›

Leveling Engravings

All Engravings in Lost Ark have 3 levels to them. These are acquired by gaining Node Points, which come from Ability Stones, Accessories, as well as Learned Engravings. Once you reach a threshold for Node Points across all sources, it will gain a Level.

What does 4x3 mean in Lost Ark? ›

4x3 means that you have 4 Level 3 Engravings. 1x1 means 1 Level 1 Engraving. For the additional 1x1 Engraving, you need to purchase 2x20. Legendary Engraving Books or 1x20. Legendary Engraving Books and cut a +9/+6.

What is more important stats or engravings in Lost Ark? ›

stats are more important and u can clear all argos phases with 3 3 engravings with no problem by the testimony of players from Korea and russia.

What is the x3 rule in Lost Ark? ›

The x3 rule looks at the battlefield like a clock, and players merely need to take their party number and multiply by 3 to figure out their cardinal position for these mechanics. In the party, each player has an assigned number, 1 - 4, found next to their name on the left side of the screen.

How long does 30 50 take Lost Ark? ›

Casual players can reach level 50 in Lost Ark in around 25 hours. A handful of players dedicated their entire time to leveling up their character. This saw them reach level 50 in around 15 hours and a few cases in as little as 10 hours.

Can you get all 7 arks in Lost Ark? ›

There are 7 lost arks scattered throughout Arkesia, but only 6/7 can be found at the moment. All 7 Arks have not yet been released in the original Korean version, but the first 6 can be acquired by completing World Quests.

How many nodes for legendary engraving? ›

Each Skill Stone offers a different number of nodes depending on its rarity level for two engravings: Rare: 6 knots per engraving. Epic: 8 nodes per engraving. Legendary: 9 nodes per engraving.

How many engravings can be active? ›

Once they're unlocked, up to two Engravings can be directly equipped to your character, although more can be added using accessories and Ability Stones.

What is the best engraving bonus Lost Ark? ›

Best Engravings in Lost Ark
  • Awakening. No matter your class or build, almost everyone uses their Awakening Skill as often as possible. ...
  • Spirit Absorption. Increases Attack Power and Movement Speed by 15%.
  • Super Charge. Great if your character uses a lot of charge attacks. ...
  • Ambush Master. ...
  • Broken Bone. ...
  • Cursed Doll. ...
  • Grudge.
Apr 26, 2022

How do you get 4x3 engravings in Lost Ark? ›

4x3 can be done with just legendary acc and not relics. With Legendary you need 3/3 everything with a 6/6 stone. 6/6 stones using the relic stones are pretty easy to get. Relic acc can augment it and make it easier to get.

Where can I get blue class engraving? ›

Pro tip: For the tradeable ones, redeem the most valuable book by checking market then sell and buy your own book. If you're willing to invest the time (approximately 4-6 hours), you can get 10 blue class engravings on each new character you level through Luterra.

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Barbera Armstrong

Last Updated:

Views: 5766

Rating: 4.9 / 5 (79 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Barbera Armstrong

Birthday: 1992-09-12

Address: Suite 993 99852 Daugherty Causeway, Ritchiehaven, VT 49630

Phone: +5026838435397

Job: National Engineer

Hobby: Listening to music, Board games, Photography, Ice skating, LARPing, Kite flying, Rugby

Introduction: My name is Barbera Armstrong, I am a lovely, delightful, cooperative, funny, enchanting, vivacious, tender person who loves writing and wants to share my knowledge and understanding with you.